Cable Trays & Accessories - rsgengineeringsolutions.com

Cable trays & accessories

Trays, bends and clamps that actually line up on site.

Ladder, perforated, solid bottom and raceway systems in MS, GI sheet, hot dip galvanized, aluminium, stainless steel and powder coated finishes — designed as per IEC 61537 and manufactured to Indian Standards.

The short version

One tray family, every accessory in the same batch

Half the site problems with cable tray are not the tray — they are a bend from one vendor and a coupler from another that never quite fit. We make the whole set together, from the same coil, in the same finish.

Material: MS, GI sheet, hot-dip galvanised, aluminium, stainless steel, powder coated
Galvanizing as per IS 2629 and IS 4759, sheet as per IS 2062 / IS 1079
Design basis IEC 61537, load class confirmed against your span and cable weight
Non-standard widths, depths and hole patterns made to drawing

Type 01

Ladder cable tray

Two side rails joined by rungs at regular spacing. The workhorse for heavy power cable runs where you want airflow and easy cable entry anywhere along the route.

Key features

Open design for easy cable entry, exit and good air circulation
Strong and durable, suited to heavy-duty power cable support
Rung spacing 250 mm c/c, or adjusted to your load requirement
Spans longer distances with fewer supports than other tray types

Common uses

Industrial and commercial buildings
Data centres
Power plants
Oil and gas facilities

MANUFACTURING RANGE

Length 2500 mm standard
Width 75 mm – 1500 mm
Height 40 mm – 200 mm
Thickness 1.6 mm – 3 mm

Type 02

Perforated cable tray

Base and sides punched with slots so cables can be tied down anywhere and heat gets out. The default choice for mixed power and control routing.

Key features

Perforations allow air circulation and heat dissipation
Cables can be clamped or tied through the holes during installation
Corrosion resistant finishes for outdoor and humid environments
Easy future expansion or re-routing of cables

Common uses

Power plants and industrial plants
Commercial buildings
Data centres
Oil and gas installations

MANUFACTURING RANGE

Length 2500 mm standard
Width 50 mm – 1000 mm
Height 25 mm – 200 mm
Thickness 1.6 mm – 3 mm

Type 03

Solid bottom tray, raceway & trunking

Fully enclosed wiring systems that protect cables from dust, moisture and knocks — with removable covers so maintenance is not a demolition job.

Key features

Shields cables from physical damage, dust, moisture and accidental impact
Removable covers for inspection, upgrades and repairs
Multiple compartments available to separate power from data
Quick to install with minimal site work

Common uses

Concealed routing in office spaces
Electrical distribution in industrial plants
Communication and data cabling in IT infrastructure
Hospitals, schools, commercial complexes, panel wiring

MANUFACTURING RANGE

Length 2500 mm standard
Width 50 mm – 1000 mm
Height 40 mm – 200 mm
Thickness 1.6 mm – 3 mm

Accessories

Jointing, bends and clamps

Every accessory is available in the same material and finish as the tray, so the run looks and behaves like one system.

Horizontal bend

Vertical bend

Tee bend

Cross bend

Reducer band

Tray covers

Coupler plate

Base coupler

Hinged coupler

Vertical coupler

Cover clamp

Hanging clamp

Cable clamp

Angle cleat

Z bracket

Purlin

Floor junction box

Fixing hardware

Support systems

What holds the run up

Channels, arms and brackets sized for your span, cable weight and ceiling condition – drilled and galvanised, ready to install.

Slotted channel

Slotted angle

Slotted Z section

Strut

Support arms

Hanging arrangements

Base plate with welded angle

Base plate with welded channel

Send your Cable trays & accessories schedule for a quote

Type, width, depth, thickness, finish, quantity and accessory counts. If your BOQ is a drawing, send the drawing — we will read it.